Actosed HP Ready
High-level disinfectant based on peracetic acid.
Solution for the final disinfection by immersion of pre-cleaned, reusable, heat-sensitive semi-critical and critical medical devices. Biodegradable, aldehyde-free.
- Packaging and references
- 1 format
Overview
Applications
- Cleaned flexible and rigid endoscopes
- Medical and surgical instruments
- Manual disinfection bath or automatic endoscope washer
Key benefits
- Combination of peracetic acid and hydrogen peroxide
- Broad spectrum, including sporicidal, in 5 minutes
- Activated solution stable for 5 days
- Can be disposed of without neutralisation according to the manufacturer
Technical characteristics
Composition
Solution (4750 ml jerrycan): stabiliser, corrosion inhibitor and excipients. Activator (250 ml): ≤ 6% peracetic acid. The activated product initially contains ≥ 2000 ppm peracetic acid and ≥ 5000 ppm hydrogen peroxide.
Material compatibility
Steel, glass, ceramics, silicone and plastics.
Efficacy and standards
- Bactericidal5 min
EN 14561
Ready to use
- Fungicidal5 min
C. albicans, A. brasiliensis
EN 14562
Ready to use
- Tuberculocidal, mycobactericidal5 min
EN 14563
Ready to use
- Virucidal5 min
Polio, Adeno, MNV
EN 14476
Ready to use
- Sporicidal5 min
Bacillus subtilis
EN 17126
Ready to use
Instructions for use
- Dilution or dose
- Activate before use: pour the whole activator bottle (250 ml) into the jerrycan (4750 ml), close and mix. Ready to use, no dilution.
- Contact time
- 5 min
- Pre-clean instruments with an enzymatic cleaner (the manufacturer recommends Actoclean Perfect), rinse surfaces and channels and dry.
- Immerse the instruments so that all surfaces and cavities are in contact; keep the bath closed.
- After the contact time, rinse with sterile water or water of at least drinking quality for at least 1 minute, then dry. Do not reuse rinse water.
- Check the solution with test strips; the prepared solution is stable for 5 days.
- Wear personal protective equipment (gloves, goggles).
Packaging and references
| Format | Reference |
|---|---|
| 5 L (4750 ml + 250 ml activator) | 01.7303.5 |
Documentation
- Product sheetPDF · ACTO GmbH · English (opens in a new tab)
- Instructions for usePDF · ACTO GmbH · English (opens in a new tab)
- Safety data sheet (SDS)PDF · ACTO GmbH · English · revised 13 February 2024 (opens in a new tab)
Official documents hosted by the manufacturer. They open in a new tab.
Safety and storage
Use products safely. Always read the label and the safety data sheet before use.
Storage
Keep the container tightly closed in a cool, well-ventilated place.
Related products and accessories
- Activator (250 ml)Part of pack ref. 01.7303.5 (4750 ml of solution + 250 ml of activator), poured into the jerrycan before use. No separate reference in the catalogue.
- AccessoryHP Ready test stripsChecks the concentration of the activated solution. Separate reference: 14.5199.25.
- Disinfection traysTrays for immersing instruments in disinfection solutions (3, 10 and 30 L).
- Actosed Forte ReadyHigh-level disinfectant based on 2% glutaraldehyde.
A quotation, a datasheet or advice?
The PROGIENE team can help with formats, quantities and documentation for this product.